Dayliff Drip Irrigation Systems - Quality Fittings for Efficient Agricultural Watering Dayliff Drip Irrigation is a range of quality drip irrigation fittings manufactured to high standards to give excellent performance in varying agricultural applications. Drip irrigation systems can be either pumped or gravity fed and are installed in a lattice of HDPE main lines with drip line off-takes. Dayliff drip irrigation fittings are manufactured to the highest standards to ensure long life in the toughest of working environments. A complete selection of components is available to provide efficient irrigation for all crops and applications. Key Installation Considerations for Drip Lines:

•Maximum drip line length is determined by available head at approximately 10m line length per 1m head

•Minimum system pressure: 3m head

•Maximum system pressure: 20m head

•Example: Maximum drip line length at 5m head is 50 meters

•Drip line spacing should be approximately 75cm, varying ±25cm depending upon crop

•System output guideline: Approximately 30m³/hr per acre (for indicative purposes only)

•Each system output should be separately calculated by multiplying total drip line length by drip line water flow per meter

•All drip line water feed should be filtered to less than 120 microns

•Drip line can be either surface mounted or buried to root depth (maximum 30cm)

•Emitter flow rates: 1.6 L/hr and 2.3 L/hr

•Other spacings available upon request